Archive for the ‘auto mechanic’ Category
Posted by admin on
March 9, 2010
is there a difference or not any at all? and what is better who gets paid more, i no for a fact alot of auto mechanics work alot and are underpaid, whos more likely to get a job with good salary etc. plz help me with this question
An auto technician knows what there doing and can do it all and professionally.
A mechanic can install brakes and water pumps and leave greasy thumb prints on the dashboard.
A technician can update a vehicles computer system with a lap-top and know how it works and why.
A mechanic can almost put the spare tire back in your car the way it came from the factory.
A technician "fixes" your problem.
A mechanic get’s you by for $50 bucks.
A technician go’s in and researches the problem and finds it then fixes it right and knows where the fix took place and how they found it.
A mechanic merely suggest’s trying a fuel filter…..every time.
A technician only works for people who also take pride in there work and offers an honest professional business.
A mechanic takes bribes for illegal inspections and cut’s there boss in on it.
A grease monkey will always give a thumbs down.
I hope this helps.
Posted by admin on
March 7, 2010
In order to become an auto service technician, or mechanic, a person should take classes that are based in science, physics and math. Discover how entry-level skills can be obtained at a community college with help from an automotive technology professor in this free video on car mechanics.
Expert: Bob Ricewasser
Bio: Bob Ricewasser is a former automotive technology professor, and an avid car collector.
Filmmaker: Nathan Boehme
Duration : 0:1:36
Read the rest of this entry »
Technorati Tags: auto, automotive, Batteries;, car, core, heater, maintenance, mechanics, problems, repair, transmissions, troubleshooting
Posted by admin on
March 6, 2010
How can an auto mechanic advance his/her career?
It depends. If you live in a big city, you have a better chance to make more money, than if you live in a small city. However the cost of living in bigger cities are higher than small cities. So in the long run, basically it’s the same. If you work on commission, it will depend on how much you will make per labor hour. For instance if a job pays 5 hours to complete and it takes you more than 5 hours you will only get paid for 5 hours. However if you complete that job in 3 hours you still get paid for 5 hours labor. So working on commission good be a good thing if you are fast, and if your manager gives you the jobs. But you could also stand around all day while all the others are working, in this case you will make nothing, unless your employer has a set weekly wage for you in case it is slow, or the boss doesn’t like you, so he gives all the gravy jobs to the ones he likes and gives you all the crapping jobs like squeaks and rattles. Also depends on if you work for a car dealer or a small shop.
You might want to consider working for a regular wage per hour, based on a 40 hour week, if you made $13.00 per hour and was at work for 40 hours you would get paid $13.00 for every hour you were on the clock.
As far as being an auto mechanic, I wouldn’t encourage it, the job sucks. Plus after you get a certain age they want to replace you because you can’t keep up, because you are getting too old. They would rather replace you with someone younger and dumber, but I guess that is part of being an American.
Good Luck
Posted by admin on
February 28, 2010
Well Im still debating if I would like this to be a career for me cause I love how cars look and I love to learn the whole structure of a car and how to even build my own but I need to know a coouple of things first.
1.Do you know how much mechanics make per year?
2.What classes would you suggested I should take in high school/college?
3.Whats a great college I can go to to learn to be one.
4. Are there many positions I can choose from if I be a mechanic or its just a one thing only?[sry if i didnt word it in a simplier way, hope you'll understand]
Yes I am a female wanting to be this but I just love cars!! Its a job Im willing to do.
Another thing, what do you think cause I want to be a veterinarain but then I want to be an auto mechanic.I dont know which of the 2 I want the most cause I love animals but then I love cars, so rite now Im just gonna see wit of the two makes the most money
Go with the Vet. I spent 45 years turning wrenches. It’s either feast or famine with the pay check.
You must be certified (Lots of hands on experience) to get the paperwork that says your an expert.
Thousands of dollars of tools you must own to work on the cars. Lots of theft among mechanics, and the shop owners cheat their technicians.
Had I the opportunity to start over, (I’m retired), I would go with Vet training.
Posted by admin on
February 28, 2010
A fuel pump relay’s job is to take some of the voltage load off of the wiring harness to allow a better current flow from the battery to the fuel pump. Determine whether a fuel pump relay is bad and needs to be replaced with help from an auto mechanic in this free video on testing car performance.
Expert: J.B. Hebert
Contact: www.wrxtra.com
Bio: J.B. Hebert is a machinist, metal fabricator, and auto mechanic who has been fixing and modifying all things mechanical for over 20 years.
Filmmaker: David Pakman
Duration : 0:2:32
Read the rest of this entry »
Technorati Tags: auto, automotive, capacitor, car, maintenance, problems, repair, repairs, transmission, troubleshooting
Posted by admin on
February 25, 2010
Everywhere there are auto-mechanic shops, I hardly see any motorcycle mechanic shops, so can you take your motorcycle to normal car shops?
Motorcycle mechanic shops may seem hard to find, but they are out there. When I bought my first motorcycle, I took it to a regular auto-garage to have it inspected before I got it registered. The mechanic who inspected it said there was a leak in the exhaust system, and that I would have to have it fixed before it would pass. I tracked down the Yamaha dealer/mechanic shop, and had it inspected there. It passed with flying colors… the "leak" was actually a factory design feature that allows water to drain from the exhaust pipe if it gets in.
auto mechanics are trained and certified to work on cars, and though you may be able to get it fixed, I would say you are better off finding a dealer/mechanic shop that specifically advertises that they work on your make of motorcycle. It will be easier to get parts from them, maintenance will be faster (they already have the right tools, equipment, and parts on hand, usually), and they’ll know what to look for if something goes wrong.
Posted by admin on
February 22, 2010
I have a 2002 Ford Escape that needs general maintanence but my mechanic went out of business. Who is the most reasonable and reliable auto mechanic garage in north Spokane, WA?
I suggest that you type in the zip code on yahoo yellow pages, then call the search result and find out who is best for you.
Posted by admin on
February 21, 2010
Southern California drivers love their cars. They spend a good part of the day in them. That’s why Rose auto repair in Yorba Linda offers a full line of body and mechanical services to keep your car in showroom condition. This team of auto mechanics and body specialists rebuild engines, match paint, remove dents, fix transmissions and more! Mysterious sound coming from under the hood? Their advanced computer diagnostics can indentify any problem in any make or model!
Visit us http://www.yellowpages.com/info-3101454/Rose-Auto-Repair?from=youtb
Duration : 0:1:10
Read the rest of this entry »
Technorati Tags: auto, body, California, dent removal, domestic, Engine, Import, mechanics, paint, rebuilding, repair, Rose Auto Repair, transmission, yellowpages, Yorba Linda
Posted by admin on
February 19, 2010
hi all..
i am wondering what is needed in order to become a auto mechanic in ontario. a family member of mine has 5 years experiance of auto repair in a diffrent country and wishing to open a shop in ontario. Does he just require a licence? Does he need to take a exam? and if so would you know of where he can take this exam .
Thanks
If he wants to go independent, he will need a business license. If he wants to work for a dealership, he can probably get someone to try him out on a thirty day basis. If he has a difficult time finding one, he could work for lower wages for a week and prove he is capable.
Posted by admin on
February 16, 2010
I want to know what the average labor rate is for auto repair mechanics in the Milwaukee, WI area – or at least where I can find them. I’m looking for objective documented information in a book or guide somewhere that shows it by geographical area. Calling around and asking various shops won’t give me the full picture I’m looking for.
A neighborhood auto shop charged me $75/hr but a chain auto shop like Midas charged $90/hr. Depends on where u go.
